|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CRO6000Z 9939 Via Pasar * San Diego, CA 92126 TEL (858) 621-2700 FAX (858) 621-2722 VOLTAGE CONTROLLED OSCILLATOR Rev A1 PHASE NOISE (1 Hz BW, typical) -60 -70 (f) (dBc/Hz) -80 -90 -100 -110 -120 -130 -140 -150 1 E+3 10 E+3 100 E+3 FEATURES * Frequency Range: 5990 - 6010 MHz * Tuning Voltage: 0.5 - 4.5 Vdc * VCO-24H - Style Package APPLICATIONS * Microwave Radios * Satellite Communications * Direct Broadcast PERFORMANCE SPECIFICATIONS Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW, typ.) Harmonic Suppression (2nd, typ.) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance (max.) Pushing Pulling (14 dB Return Loss, Any Phase) OFFSET (Hz) VALUE 5990 - 6010 -108 -18 0.5 - 4.5 18 42 50 50 <2 <0.05 -40 to 85 VCO-24H 5 122 APPLICATION NOTES Vdc mA pF MHz/V MHz C UNITS MHz dBc/Hz dBc Vdc MHz/V dBm Operating Temperature Range Package Style POWER SUPPLY REQUIREMENTS Supply Voltage (Vcc, nom.) Supply Current (Icc, typ.) All specifications are typical unless otherwise noted and subject to change without notice. * AN-100/1 : Mounting and Grounding of VCOs * AN-102 : Proper Output Loading of VCOs * AN-107 : How to Solder Z-COMM VCOs NOTES: Fundamental Rejection (typ.): -40 dBc Phase Noise @ 100 kHz offset (1 Hz BW, typ.): -128 dBc/Hz (c) Z-Communications, Inc. Page 1 All rights reserved LOW COST - HIGH PERFORMANCE VOLTAGE CONTROLLED OSCILLATOR TUNING CURVE, typ. 6050 6040 CRO6000Z PAGE 2 FREQUENCY (MHz) 6030 6020 6010 6000 5990 5980 5970 5960 5950 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 85 25 -40 c c c TUNING VOLTAGE (Vdc) POWER CURVE, typ. POWER OUTPUT (dBm) 10 9 8 7 6 5 4 3 2 1 0 5963 5971 5978 5985 5992 6000 6008 6016 6024 6031 25 c FREQUENCY (MHz) PHYSICAL DIMENSIONS VCO-24H 415-0096 REV. A (DRAWING NOT TO SCALE) 0.220 24 23 22 21 20 1 19 18 17 16 0.606 0.631 0.000 0.026 0.141 0.226 0.311 0.396 DETAIL A TABS RANGE: SEE NOTE 5 (4 PLACES) 2 3 4 5 6 TOP 15 14 13 0.000 0.025 7 0.178 0.263 0.348 0.433 0.518 0.603 0.688 0.841 0.866 PIN 1 8 9 10 11 12 1. The inside radius of all 24 half holes at the perimeter of the board are plated to provide a surface for the attachment of the VCO Module to the PCB. 21 pads are for grounding. 2. The surface of the shield is tin-plated and may be soldered to. The shield's base metal is cold rolled steel. 3.The ground plane on the bottom side is ground and attaches to a ground track on the top side of the board as well as to the shield. 4. Unless otherwise noted all dimensions are in inches. 5. Unless otherwise noted all tolerances are as follows: .xxx = .010 0.481 .055 BOTTOM SEE DETAIL A .032 P1 P2-12 P13 P14-16 P17 P18-24 RF OUTPUT GROUND VCC GROUND Vtune GROUND .015 .030 DETAIL B (TYP) (3 PLACES) SEE DETAIL B (c) Z-Communications, Inc. Page 2 Printed in the U.S.A. |
Price & Availability of CRO6000Z |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |